Track Order
Check delivery status
Learn More
Support for Pompe solaire pour fontaine à eau 35 W 340 GPH (orange)
Setup, care and troubleshooting for model P135C · Manual P03
Get Started
Set up and use your product quickly with beginner resources.
P03 User Manual
Assembly, care and troubleshooting for this kit.
View Manual
Warranty
Read coverage and claim steps
Learn More
Returns
Read the return policy
Learn MoreSpecs
| Model | P135C |
|---|---|
| Solar Panel | 35W |
| Max Water Flow | 340 GPH |
| Pump Power | 25W |
| Power Cord Length | 16 ft |
| Recommended Pond Size | 170-680 gallons |
| Max Lift | 13.1 ft |
| Protection | Dry-run / low-water protection |
| Water Depth | Max 16in/ Min 2.3in |
| Spray Height | Up to 8.5 ft |
| Tubing | 6.6 ft PVC tubing |
| Best Use | Ponds, fountains, water features |
| Manual number | P03 |
Specifications follow the current product listing for model P135C. Maximum ratings vary with sunlight and installation and are not simultaneous operating guarantees. Follow the P03 manual for assembly and care.
Accessories Checklist
Match the pictured parts to your kit. Nozzles and fittings are grouped; follow the linked manual for assembly.
Application example from this product’s gallery
35W solar panel
Check the glass, attached lead and mounting points for damage.
Submersible water pump
Keep the inlet and water sensor clean and the pump fully submerged.
Foldable panel and support
Open and support the panel securely as pictured. Aim it at direct sunlight and keep the cable slack.
Nozzle set and extension parts
Select a spray pattern that keeps water inside your basin.
PVC tubing
Use for a small recirculating water feature. Keep the run short and free of kinks.
Filter sponge and filter cover
Fit the filter before use and rinse it regularly.
Installation Steps
Check the pictured kit, then follow each illustrated step. Manual illustrations can differ in color or finish; match your supplied fittings.
-
Check your kit and water feature
Inspect the pump, panel and cable before assembly. Stop if a cable is cut or the panel is cracked. Fill the basin with clean water and choose a position that keeps the spray inside the basin.
-
Mount the panel in direct sunlight
Open the foldable panel and set its support securely on a stable surface. Aim it toward strong direct sunlight. Keep it clear of shade and leave slack in the cable.
-
Assemble the nozzle and set the outlet
Fit the extension pieces and spray head shown for your nozzle set in the manual. Start with the flow control open. For a tubing feature, connect the tube securely and keep it free of kinks.
-
Submerge the pump and connect the cable
Fit the filter cover and sponge. Keep the pump off loose silt and fully under water, with the nozzle outlet above the surface. Connect the matching pump and panel plugs; tighten the protective collar if fitted.
-
Start the pump and adjust the spray
Test in strong direct sunlight. Check that the spray returns to the basin and that the water level stays above the sensor. If flow is weak, remove the nozzle to test the pump, then clean the filter and check the connections.
Use your manual for this kit. Reference videos show the model or pump range named on each card. Parts and controls may differ from your kit. Follow your linked manual for assembly, connections and compatible parts.
FAQ
Setup & Power
Which product does this support page cover?
35W 340GPH Solar Fountain Pump (Orange). Match the wattage, pump version and battery configuration to the label on your kit. Different colors and kit revisions can use different parts.
Will this pump run at night?
No. This kit runs from direct sunlight and has no battery included. Expect reduced or intermittent flow in weak light and no operation after sunset.
Why does the pump stop when the panel is shaded?
Solar output drops when a tree, railing, cloud or other object shades the panel. Move the panel into full, direct outdoor sunlight and clean its surface. Intermittent spray in weak sunlight can be normal for a direct-solar kit.
Can I put the solar panel behind a window?
Place the panel outdoors in direct sunlight. A bright room or sunlight filtered through glass may not provide enough usable power for reliable operation.
Where should I position the pump and nozzle?
Keep the entire pump under water and the nozzle outlet above the surface. Place the inlet away from silt and loose debris. Use only the extension parts shown in your manual, and keep the spray within the basin.
Water Flow
Why is the spray lower than expected?
First test in strong direct sunlight. Check water level, clean the filter and nozzle, and straighten the tube. Try running the pump without the nozzle to see whether the restriction is in the spray head. Greater lift, longer tubing and extra outlets reduce available flow.
How do I adjust the flow?
Use the pump or nozzle control supplied with your kit, and try another spray head. Start with the control open while troubleshooting.
Can I use the nozzle and tubing at the same time?
Use the nozzle or tubing separately unless the manual for your exact kit shows a diverter. Do not add an unverified splitter.
Does this replace pond filtration or continuous aeration?
This is a fountain and water-circulation kit. Do not treat intermittent solar operation as a substitute for filtration or continuous life-support aeration in a stocked pond. Choose those systems separately for your pond and fish load.
Cleaning & Troubleshooting
My new pump is not starting. What should I check first?
Check four things in order: full direct sunlight, secure cable connections, enough water to cover the pump and sensor, and a clear filter and nozzle. Disconnect power before cleaning. After correcting these points, reconnect the panel and test without a nozzle.
How do I clean the pump and filter?
Disconnect the pump from its power source first. Remove the filter cover and sponge as shown in the manual, rinse away debris with clean water, and use a soft brush on accessible surfaces. Refit the filter before putting the pump fully under water and reconnecting.
How often should I clean it?
The manual recommends weekly pump cleaning. Inspect sooner if flow drops or the basin contains leaves, algae or silt. Wipe the solar panel with a soft cloth when dust or water marks reduce light reaching the cells.
Why does it repeatedly start and stop?
Check for moving shadows, weak sunlight, a loose plug, a clogged filter or a water level close to the sensor. Refill the basin and test under steady direct sunlight. If the problem continues, send support a short video of the panel, water level and pump.
What should I do if the pump makes an unusual noise?
Disconnect it, check that it is fully submerged, and remove debris from the inlet and accessible filter parts. Do not run the pump dry. If noise continues after cleaning and refilling, stop using it and contact support.
Can I keep using a damaged cable or cracked panel?
Stop using the kit and disconnect it. Do not rely on tape to repair a cut power cable or a cracked panel. Contact POPOSOAP for the correct replacement before using the kit again.
How should I store it for freezing weather?
Stop operation before the water freezes. Disconnect the kit, clean the pump and tubing, drain the water and store the parts dry in a sheltered place. Check cables and fittings before starting it again.
Parts & Support
Can I add a battery, extension cable or replacement pump?
Check compatibility with POPOSOAP using your order number and photos of the model label and plugs. Matching connector shape alone does not establish electrical compatibility. Do not connect arbitrary batteries, panels or mains adapters.
What should I send when I contact support?
Include your order number, product model, a photo of the panel and pump labels, and a short video showing sunlight, water level and the problem. Email info@poposoapsolar.com or use the contact page.
Where are the warranty and return terms?
Read the current warranty policy and return policy for eligibility, exclusions and the steps to request help. Keep your order confirmation and contact support before returning a product.
